Silver Solder Wire & Handy Flux Jewelry Soldering 5 DWT of Each Soft, Medium and Hard

🟢Soldering brazing all-purpose, low-temperature flux Handy Flux is a long-lasting white paste type, very durable won’t break down from prolonged heat, an all-purpose flux for use in the brazing and soldering Gold, Silver, Brass, Copper, and other Non-Ferrous Metals. 🟢Handy Flux is an active fluoride/borate-type flux that is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F. Paste formula can be cleaned up with hot water. 🟢Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint. 🟢Silver Solder Wire used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings, and components. 🟢Silver solder comes in 3 grades… the grades are the relative temperature flow points between one and the other. The softer the solder the less content of silver with a lower melting temperature. 🟢SALE is for Handy Flux a 7oz. bottle with Brush and 3 GRADES of SILVER Solder Wire, (Soft, Medium, and Hard) 5 Feet long of each grade each, weighting approximately 1/4Toz). - 4.85 Dwt (Total sale for 15 feet - 3/4Toz. ) 🟢SOFT/EASY SPECIFICATIONS: 🔸 Solder WIRE: Silver Content of 65% 🔸 Melt temperature: 1,240°F - 671°C 🔸 Flow temperature: 1,325°F - 718°C 🟢MEDIUM SPECIFICATIONS: 🔸 Solder WIRE: Silver Content of 70% 🔸 Melt temperature: 1,275°F - 691°C 🔸Flow temperature: 1,360°F - 738°C 🟢HARD SPECIFICATIONS: 🔸 Solder WIRE: Silver Content of 75% 🔸 Melt temperature: 1,365°F - 741°C 🔸 Flow temperature: 1,450°F - 788°C

• 🟢 Silver Solder Wire and Handy Flux
• 🟢 3 Grades of Solder Wire 20ga (Each wire is approximately 5 feet)
• 🟢 7oz. handy flux and 5 dwt solder wire each grade
• 🟢 JETS Product # 1924-407+1925-452-SMH Made in USA
• 🔻More Information on Product Description🔻